UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Jonathan Chetwynd
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to
ttyUSB0

**I have a number of other devices (not currently connected)
0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]  

Reply | Threaded
Open this post in threaded view
|

Re: UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Benjamin Vanheuverzwijn
Did you unload the ftdi_sio driver?

$ sudo rmmod ftdi_sio

On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd <[hidden email]> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0

**I have a number of other devices (not currently connected) 0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]   



--
Benjamin Vanheuverzwijn


libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]


Reply | Threaded
Open this post in threaded view
|

Re: UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Jonathan Chetwynd
whereas ftdi_sio is loaded when my 6010 products are connected, it is not loaded when my 6014 product is connected.


ie after inserting 6010:
r$ lsmod
Module                  Size  Used by
ftdi_sio               53026  0


$ sudo rmmod ftdi_sio  has no effect


regards


On 23/06/16 13:16, Benjamin Vanheuverzwijn wrote:
Did you unload the ftdi_sio driver?

$ sudo rmmod ftdi_sio

On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd <[hidden email]> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0

**I have a number of other devices (not currently connected) 0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]   



--
Benjamin Vanheuverzwijn


libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]





libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]


Reply | Threaded
Open this post in threaded view
|

Re: UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Jonathan Chetwynd
In reply to this post by Benjamin Vanheuverzwijn
libftdi1-1.1/build$ sudo make install
.....

$lsmod
Module                  Size  Used by
ftdi_sio               53026  0

$ sudo rmmod ftdi_sio

$ lsmod
Module                  Size  Used by
hid_apple              13386  0

$ which ftdi_eeprom /usr/local/bin/ftdi_eeprom

$ ftdi_eeprom --read-eeprom example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers [hidden email]
Unable to find FTDI devices under given vendor/product id: 0x403/0x6014
Error code: -4 (usb_open() failed)
Retrying with default FTDI pid=0x6001.
Error: device not found


On 23/06/16 13:16, Benjamin Vanheuverzwijn wrote:
Did you unload the ftdi_sio driver?

$ sudo rmmod ftdi_sio

On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd <[hidden email]> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0

**I have a number of other devices (not currently connected) 0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]   



--
Benjamin Vanheuverzwijn


libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]





libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]


Reply | Threaded
Open this post in threaded view
|

Re: UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Jonathan Chetwynd
requires sudo or udev for this device... but why only this one?

wfm...



On 23/06/16 14:10, Jonathan Chetwynd wrote:
libftdi1-1.1/build$ sudo make install
.....

$lsmod
Module                  Size  Used by
ftdi_sio               53026  0

$ sudo rmmod ftdi_sio

$ lsmod
Module                  Size  Used by
hid_apple              13386  0

$ which ftdi_eeprom /usr/local/bin/ftdi_eeprom

$ ftdi_eeprom --read-eeprom example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers [hidden email]
Unable to find FTDI devices under given vendor/product id: 0x403/0x6014
Error code: -4 (usb_open() failed)
Retrying with default FTDI pid=0x6001.
Error: device not found


On 23/06/16 13:16, Benjamin Vanheuverzwijn wrote:
Did you unload the ftdi_sio driver?

$ sudo rmmod ftdi_sio

On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd <[hidden email]> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0

**I have a number of other devices (not currently connected) 0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]   



--
Benjamin Vanheuverzwijn


libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]






libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]


Reply | Threaded
Open this post in threaded view
|

Re: UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Ryan Tennill
On 06/23/2016 10:56 AM, Jonathan Chetwynd wrote:
requires sudo or udev for this device... but why only this one?

wfm...



On 23/06/16 14:10, Jonathan Chetwynd wrote:
libftdi1-1.1/build$ sudo make install
.....

$lsmod
Module                  Size  Used by
ftdi_sio               53026  0

$ sudo rmmod ftdi_sio

$ lsmod
Module                  Size  Used by
hid_apple              13386  0

$ which ftdi_eeprom /usr/local/bin/ftdi_eeprom

$ ftdi_eeprom --read-eeprom example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers [hidden email]
Unable to find FTDI devices under given vendor/product id: 0x403/0x6014
Error code: -4 (usb_open() failed)
Retrying with default FTDI pid=0x6001.
Error: device not found


On 23/06/16 13:16, Benjamin Vanheuverzwijn wrote:
Did you unload the ftdi_sio driver?

$ sudo rmmod ftdi_sio

On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd <[hidden email]> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0

**I have a number of other devices (not currently connected) 0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

This kind of usb serial device will almost always come up with root:root permissions. You need to create a udev rule for the device or family of devices to adjust permissions. Some software packages will install a rule for you.

Ryan

-- 

217-351-2655 ext. 126
Distant Focus Corporation
4114B Fieldstone Rd
Champaign, IL 61822
http://jupiter.distantfocus.com/projects/


libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]


Reply | Threaded
Open this post in threaded view
|

Re: UM232H-B: Unable to find FTDI device with description: i:0x0403:0x6014

Ryan Tennill


On 06/23/2016 11:30 AM, Ryan Tennill wrote:
On 06/23/2016 10:56 AM, Jonathan Chetwynd wrote:
requires sudo or udev for this device... but why only this one?

wfm...



On 23/06/16 14:10, Jonathan Chetwynd wrote:
libftdi1-1.1/build$ sudo make install
.....

$lsmod
Module                  Size  Used by
ftdi_sio               53026  0

$ sudo rmmod ftdi_sio

$ lsmod
Module                  Size  Used by
hid_apple              13386  0

$ which ftdi_eeprom /usr/local/bin/ftdi_eeprom

$ ftdi_eeprom --read-eeprom example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers [hidden email]
Unable to find FTDI devices under given vendor/product id: 0x403/0x6014
Error code: -4 (usb_open() failed)
Retrying with default FTDI pid=0x6001.
Error: device not found


On 23/06/16 13:16, Benjamin Vanheuverzwijn wrote:
Did you unload the ftdi_sio driver?

$ sudo rmmod ftdi_sio

On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd <[hidden email]> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:

$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014 example_UM232H-B.conf

FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <[hidden email]>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)

thanks

Jonathan

Ubuntu 14.04LTS

dmesg

[  520.257141] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[  520.276926] usb 3-3: New USB device found, idVendor=0403, idProduct=6014
[  520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  520.276938] usb 3-3: Product: UM232H-B
[  520.276941] usb 3-3: Manufacturer: FTDI
[  520.276944] usb 3-3: SerialNumber: FTWFRDWY
[  520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
[  520.278543] usb 3-3: Detected FT232H
[  520.278546] usb 3-3: Number of endpoints 2
[  520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[  520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[  520.278555] usb 3-3: Setting MaxPacketSize 512
[  520.278718] usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0

**I have a number of other devices (not currently connected) 0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.

This kind of usb serial device will almost always come up with root:root permissions. You need to create a udev rule for the device or family of devices to adjust permissions. Some software packages will install a rule for you.

Ryan

's/permissions/ownership/' !

-- 

217-351-2655 ext. 126
Distant Focus Corporation
4114B Fieldstone Rd
Champaign, IL 61822
http://jupiter.distantfocus.com/projects/


libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [hidden email]